r/Buell • u/its-sophiebloom • 6d ago
$2,000 for a 2001 Buell with 3,000 miles… would you buy it?
I couldn’t really say no to this one 😂
2001 Buell, only ~3k miles, and overall it’s in really good shape. Just a few small scratches on the front plastics/mirror.
Curious what the Buell crowd thinks — good deal or bad decision? 😂
r/Buell • u/Effective_Table_4732 • 6d ago
1125r with 320kms
Recently managed to score this 2009 1125r with only 320kms here in Australia and thought you guys might appreciate it. I've been trying to research but cant find any information on this model with these fenders. Apparently they are factory fenders but i havnt seen any others online and im wondering why they say "1125rs".
Also looking for any advice on remapping the ECM when i swap the exhaust and air filter, any advice would be appreciated, thanks:)
r/Buell • u/Slow_S60_ • 6d ago
Night rides
Enable HLS to view with audio, or disable this notification
r/Buell • u/EnvironmentalTip508 • 8d ago
Had to twin post
It actually has been commandeered by my wife because she liked it so much and now that I have my 9r up and ripping
r/Buell • u/Alive-Objective4530 • 11d ago
Pitstop on the Causeway
Heading home from a meeting on Sanibel. Who can resist golden hour?!
r/Buell • u/Alive-Objective4530 • 13d ago
Super Cruiser found a new demographic.
Random bachelorette party: “Can we get a picture on your motorcycle?”
They had no idea what a Buell Super Cruiser was.
Can confirm out of state husband was V jealous.
r/Buell • u/twofourorjustaboard • 17d ago
Spring belt tensioner
Curious, new belt “seems” tight. Did all the correct torque specs and such. Had a wheel bearing go out not long after the new belt was put on. The bearing could have been “bad”, had about 10-15 k on it. To release a little tension I was thinking of going with the free spirt tensioner. Any thoughts, sure there will be many as buell rides are all opinionated as me about what we love
r/Buell • u/SkyHigh27 • 23d ago
So much pain and suffering
I got my big nuts off. If you know, you know what an ordeal that is. No impact drivers allowed. I’m disassembling until I find the source of a funny noise coming from everywhere and nowhere. After replacing the oil pump and a lot of clutch and primary parts the noise only got worse. So the lump is back on the bench for more surgery. Well, right now it’s in the floor.
r/Buell • u/jasonpmcelroy • 24d ago
Tech: Adding lighting to stock Uly top case
I commute year round in busy freeway traffic on my Uly and added top case lighting about a decade ago. Was concerned that the taillight was too obstructed by the top case and wanted something bigger and at eye-level for drivers behind me.
Price was about $60 of Amazon-grade commodity parts.
Full documentation is here: Buell Top Case Lighting
Key facets:
- uses a double row of LED strip lights under the stock reflector (two nuts to remove, easy!)
- two wire input to the LED with a resistor limiting light output when brakes not engaged
- diodes used to prevent run and brake lights backfeeding each other
- used weather resistant connector right at tail/rack junction so top case can easily be removed
- routed wire in through case lid and left loop/slack for opening closing. has not failed in 10yrs of constant use
Enjoy.
r/Buell • u/EnvironmentalTip508 • 25d ago
The 1275 xb9r lives!!!
Well I've got 35 miles on it now, not as powerful as I expected, but it lives so I'll enjoy it!!
r/Buell • u/PossumSlobber • 25d ago
What does this light actually mean?
I’ve read it’s a “check engine light”, but without much real support to tell me the functional purpose. Does it indicate a fault stored? Or does it indicate an active mechanical issue like an oil pressure light for example? My 8600 mile XB12R has flashed it at me randomly a couple times and I’m curious where I need to be pointed diagnostically speaking. Thanks guys!
Edit: I’m a technician by trade. I understand how it all works. I took the photo with the bike not running because I couldn’t catch it while riding.
Second, my word choice in “flashed” at me is also misleading. It has come on steady for a couple of minutes once then went out before I could get stopped, as well as come on and gone out within a couple seconds 2-3 times.
r/Buell • u/Appropriate_Bath361 • 24d ago
Do aftermarket performance leads on buells cause interference with the ecm?
Very much BUELL SPECIFIC question mods. I replaced the spark leads on my buell xb12 with tons performance high performance leads (copper core I'm assuming) and after it warms up it runs poorly, surges and dies. (warming up is fine) I've read that this is becuase these aftermarket leads emmit lots of interference and it will mess with the ecu. I also cant get ecm spy to stay live logging when the bike is running, but when it's off there are zero issues. as soon as i start the bike its starts cutting out, then ecmspy gives up and says connection timed out. Anyone else had a similar experience?
r/Buell • u/therightpedal • 26d ago
Hot damn, I found race and stock ECM maps online for 2004-2007 XB9 & XB12! So hard to find!
I cannot vouch for these maps. I have nothing to do with this site. Just sharing.
However, I did compare the values of the 2007 XB9 Race file I have compared to this and they are identical.
Enjoy!!
r/Buell • u/ManoBici • 27d ago
190 55 rear on a xb2 short swingarm
I bought a pair of Pirelli Supercorsa tires—specifically the 190/55 size for the rear—but I didn't find much information regarding sizes. I’d like to know which ones you guys use; I chose this size because I was worried the 180/60 wouldn't fit and I wanted more contact patch. Here are photos of the tire installed
it doesn't rub against the swingarm, though it sits very close to the fender.
r/Buell • u/Twostroketimmy • 29d ago
1125R went kaboom
Good god, I’m coming up on 15+ years as every flavor of mechanic including class 8 truck and trailer (current) this is the most odd engine swap I’ve ever done lol. PO took an impact to the crank and the bearings spun out of it (I’m told, honestly I’m thinking this was an auction bike. Oddly put together etc) but we’ll get it going with my spare helicon engine. Definitely a bike you need the service manual for 🤷♂️
r/Buell • u/drfuyutsuki • 29d ago
CAD Files?
Does anyone happen to have a CAD model for the handle bar retention plate/cap for a XB12S?
r/Buell • u/manuelito9 • Aug 02 '26
exhaust Help/Advice
Hello Buellers! I'm currently looking at picking up an '06 xb9sx with about 21k miles and in good shape from what I can tell... BUT there is a caveat. Current owner has installed a drummer exhaust and a k&n air filter; because of these after market parts there are codes thrown for 02 and running lean on the rear cylinder. There is a race tune installed as there is a buelltooth dongle and tablet in the mix, but these codes keep showing up. At about 3k for price is this an issue simple enough to deal with or should I walk away? Does anybody have experience in dealing with this issue? All help would be greatly appreciated as I am eager to join your ranks. Thank you in advance!
r/Buell • u/EchidnaNo2417 • Aug 01 '26
After a month.
Can say this Bike has been really fun to ride. Had it for about a month now replaced the drive belt cleaned it up, ceramic coated it as well. Do have it posted for sale In my area! Trying to get something smaller to teach my wife.