r/pcmasterrace • u/Front_Cookie_1198 • 1d ago

Hardware PSU fails dramatically

Enable HLS to view with audio, or disable this notification

36.2k Upvotes

97% Upvoted

2.0k comments sorted by

View all comments

Show parent comments

80

u/Stormagedd0nDarkLord 21h ago

Perhaps not a good idea grabbing it with his bare hands then???

49

u/Viking4269 21h ago

Nope, and bare feet for maximum grounding...

3

u/1c3Type 19h ago

The shortest path to ground is still via the psu's cable

9

u/Viking4269 19h ago

Judging by the two holes burned in the case under the mains plug. I think there is a good chance that there was no PE connection and the case was live at 220V at least some of the time doing this. The guy was lucky he "mostly" only touched it after the arc had carved an isolation clearance.

1

u/unwantedaccount56 14h ago

Well, the arc could have isolated it from neutral/PE as well, putting the case on 220V. The connection of the case to PE is probably much more solid than phase, but if PE wasn't connected at all (bad cable), then neutral could come from the PCB touching the case as well. Also, if there was a PE connection, then there definitely wasn't an RCD breaker, which should always exist for workshop power sockets.

39

u/Enlight1Oment 20h ago

I feel like the power outlet itself individually should have an on off switch for something used as a test bed

4

u/Suspicious_Dingo_426 18h ago

Yeah, pretty much. That's also got to be one of the cheapest of the cheap garbage PSUs. No padding in the box? Not wrapped in anything? There's no way I would have plugged that fire hazard in.

2

u/snypre_fu_reddit 8h ago

This wasn't a new PSU, this was an RMA return from a customer. So a customer packed it.

1

u/UnimagineDragons 7h ago

Probably rattled around and whatever insulated the case from the components dislodged

1

u/Suspicious_Dingo_426 27m ago

If that's the case, why would you immediately plug it in to mains power without inspecting it first? Any place I've been a tech at would have rejected the RMA for improper return shipping.

2

u/ccarlyon 5090FE | 9800X3D | 64GB DDR5 | PCMR Limited Edition Lian Li O11 17h ago

Typical British Type-G socket W.

2

u/Iv4ldir 14h ago

This... More safe to just inplug/cur at source instead of this. And also maybe plug in then turn on. Not pluging while live...

1

u/ParrotofDoom 16h ago

Best powering it up through a dim bulb tester.

1

u/notwaffle 15h ago

Probably but in my past decade of working jobs with some sort of testing equipment that is potentially bad i have never had anything more than a power strip thats filled with 5 other things

1

u/vlobe42 12h ago

I collect vintage Macs and every time I plug in a new one for the first time or when I’m testing one with CRT or PSU issues, I connect it through a smart plug so I can quickly shut off the power if something goes wrong. Gives me a lot of peace of mind.

1

u/GhettoDuk 9h ago

No need for a switch. Just have the outlet accessible and he could have yanked the cord out without grabbing the arcing device.

Workplace safety is a bunch of crap you will never think of until you are almost killed yourself. PLEASE read up on it. This video scared me because I'm about to rebuild my workbench and I'm not sure I would have placed an accessible outlet for something like this. Now I'm thinking about getting an E-Stop mushroom to cut bench power.

17

u/marr 20h ago

Might be nice to have a setup where you can quickly reach the power outlet to unplug / switch off at that end.

2

u/Thraxx01 20h ago

Electricity has already found a path that it really likes to ground, won't zap you

1

u/I-am-fun-at-parties 20h ago

It's a metal case with a PE connection. Unless they have no RCD, that is as safe as it gets, since it would trip the RCD if the case had any voltage against earth.

3

u/Stormagedd0nDarkLord 20h ago

I have a sneaking suspicion that perhaps this particular unit is not quite up to spec...

2

u/I-am-fun-at-parties 20h ago

probably not, but I don't see why the PE/case connection wouldn't be there. and the RCD isn't part of the device.

2

u/Stormagedd0nDarkLord 20h ago

True but at this dramatically explosive point I'm not trusting anything made by human hands.

1

u/JackPoe 20h ago

Better than having a whole fuckin' fire.

I've grabbed cast iron out of 500 degree ovens before just so food wouldn't burn. If you're quick you'll only have temporary damage.

1

u/ParticularBanana8369 19h ago

Peeling off fingerprints is temporary, sure

2

u/JackPoe 19h ago

That's why you gotta be careful which finger you use for unlocking your phone

1

u/Stormagedd0nDarkLord 17h ago

ok this made me laugh... or at least smile and exhale audibly through my nose.

1

u/danikov 19h ago

Panic makes you forget basic shit, like the wall socket.

1

u/Stormagedd0nDarkLord 17h ago

which was conveniently tucked away in a secure location for your aesthetic pleasure!

1

u/dikicker 19h ago

ok bro

https://giphy.com/gifs/H24Zi5xbFKc1i

1

u/Stormagedd0nDarkLord 17h ago

I'd like to see this fella try it.

https://giphy.com/gifs/Y0FZeOprlmXn2

1

u/dikicker 17h ago

Based on that gif it looks like he already has

1

u/Stormagedd0nDarkLord 17h ago

https://giphy.com/gifs/3o7TKDt2tKDR6WRCuI

this gif would be the "after"

2

u/dikicker 17h ago

Bro nsfw tag please you're gettin me all steamy and bothered

1

u/SkinTightBoogiePI 18h ago

My first thought. Also, why is the other end of the power cable hidden inside that table? If he is testing PSUs, the cable should be connected to a power bar with a fuse and a switch on it.

1

u/Stormagedd0nDarkLord 17h ago

yeah somewhere yankable at the very least. to be fair, there was prob a powerbar with a switch in the table cavity.