Dont hate me.

Fellow HK enthusiasts/poors/nerds, long time lurker, first time poster. Have two questions for the group because I don't want to create two separate posts in an effort to simplify things.

1. Just picked up my grail 5.56 rifle in an MR556 A4 11". Looking for suppressor recommendations for it. From all of my research I've gathered over the past couple of months, seems like a HUXWRX 556k/Ti is the most recommended based on these loving the low back pressure designs and apparently it being the only brand that HK will warranty (I emailed CS and they didn't exactly specify, just that to trust the mainstream/reputable brands), but open to more options. NODs are on the table as well, so night shooting is a possibility in the future, so that could change options on whether or not to get a Ti can as well.

2. The HK-bug is real, and I'm looking at getting an MR762 A4 as well. Not entirely sure what I'd want out of a semi-auto .308/7.62, so just looking for some opinions and thoughts on whether y'all would recommend the 13" Assaulter or the 16.5" DMR. Long range is something I've always thought about getting into, but the vibes of the Assaulter are unmatched to say the least. I do have a 20" Weatherby in .308 that I could potentially use as a long range rifle, however it's always just been dedicated to hunting and would probably require some glass updates up top. And same kind of deal with the previous question in what suppressors y'all would recommend, both for the 13" and the 16.5".

Thanks in advance!

KAK just dropped a plan B compatible mount that takes heavy inspiration from the HK 416A5 and G95 style muzzle devices. I’ve had good luck with their other plan B muzzle devices. Only 1/2x28 at the moment.

Anyone else had this sort of malfunction??

The P2000 is such a sleeper of a handgun. Understandable why HK discontinued it. It’s a shame it wasn’t as popular as the USPc.

Just got this baby for $700 at a local gun shop. It came with only one 10-round magazine. It has some holster wear and I have a suspicion that this is one of the early ones.

Anyways...how'd I do?

What mount/adapter did you guys go with? I want my suppressor (Plan b setup) as flush as possible to the handguard, but with the AGB nozzle there, did you guys run into any issues? Looking to go near the look I attatched below

I recently purchased a used p30L and noticed it has a silver control latch. It doesn't feel like a super short reset, but I have nothing to compare it to since I'm new to the p30

Does anyone know if they are always black from factory or if this is a grey guns SRS? Something else?

Manufactured in 2023

Quick range trip to shoot the VP9CC and also testing out the Shiv on the USPC.

Only had one failure to feed on the USPC but this was the first time using the aftermarket barrel and using the Shiv. I was also alternating round nose 115 and flat nose 147 so it was likely induced by that.

Well I finally snagged a USP 9 full-size and were the same age with date codes of AA. Terrible joke I know but you laughed. Anyways, I've always wondered why no brand makes full metal aftermarket mags for this. So I took a short bit of time to make P30/VP9 mags fit. Properly spaced, feeds dummy rounds flawlessly, and locks back. Hoping to get to the range soon to test it out.

Just got factory new vp9 put about 200 rounds through her “sick gun” but cleaned it before shot it and now cleaning again noticed a blueish thread sticking out the aft side of the trigger bar? Looking through owner manual and can’t seem to find anything?

Weird but actually believe it was primer sealant from some of the HSTs I had ran through it…

I installed a Geissele MR trigger and ARC Fire SS with 416 selectors and ran the Fireteam 556 this weekend it’s so damn smooth. Just passed 1k rounds and this thing continues to impress me 🤘🏽

https://www.hkpro.com/threads/spring-reference-chart-for-different-lem-variants.168700/?utm_source=google&utm_medium=organic

I converted a stock P2000 V2 to 4.1. According to this chart, I'm still using the V2 hammer spring (part 214695). Does anyone know or have experience with changing the hammer spring to the Light LEM HS (part 214300)? Would this create any issues?

Thanks in advance.

I picked up a VP9-B optics ready last week and got it in today. and noticed when I got home that the rear optics/suppressor height sight is a little loose in the dovetail. not enough to where it's flopping around. But enough to where I can wiggle it back and forth ever so slightly in the dovetail with just my fingers. I can see it move if I put it under a light when I manipulate it too.

is this normal? or something I should contact HK about? I picked up the Vp9a1 K - B as well today while I was out, and it has regular sights, but sits rock solid in the dovetail

EDIT: I whiggled them a bit with my fingers and suddenly they tightened up. I can still move them with my fingers, it's just no longer just sliding side to side with finger pressure. but when it moves, it moves to the left of center and stops, and to the right of center, and stops there. 

EDIT 2: looks like I'm calling HK in the morning. I went out to the back of the ranch to test fire a mag. my aim was ALL over the place. at the end of the mag the rear sight was half way out of the dovetail and I could literally just slide it in and out of the dovetail with light finger pressure. looks like the ONLY thing holding it in place was some loctite . 

Just got my P30L V3 beginning of August. First 250rd were at steel and other targets for fun. Today I went to range and did 200rd of targets. I'll admit I'm not a good pistol shooter, but I definitely shoot other pistols better. Red target was rapid fire with DA first Shots. Blue Targets are 5" fired in SA.

All 10yd

Last pic is 5 shot slow fire. I called the one way left as soon as i squeezed it off. I'm running medium back and large sides. The large back hump was hurting hand.

Is a stock vp9 with one mag for 425 a good price? Or should I wait for the gunshow

Edit: it's a vp9 sk

What an incredible display!!

⚠️Metal mags contacting a polymer mag release tab isn’t a great combination because over time the metal mag can wear down the polymer mag release tab faster. There’s a reason HK uses polymer OEM mags for the USP9 and USP40. Newer HKs like the P2000 and P30 use metal tabbed mag releases, so metal mags are perfectly fine in those. The USP45 is the exception in the USP lineup since it also uses a metal tabbed mag release, which is why its OEM mags are metal. The USP9 and USP40 use polymer tabbed mag releases.

Final build (maybe lol). ~1k rounds through it, no hiccups. I love this thing man.

P.s. buy a rifle you enjoy looking at every day.

For anyone with mutated hands that can’t shoot the p30 without the gun treating your finger like an all you can eat buffet. I can confirm this works. Thanks for all the recommendations.

Ended up doing the “Vickers Mod” as well as cut the mag release down to a nub (I never use the left side release but I kept a small nub in case of emergencies) I know it’s not perfect and can probably use some more polishing but I’m probably going to get the lower cerakoted anyways

Finally can enjoy the damn gun, now I just need to save up some will power and money to get the slide cut.