I feel like what's supposed to be the "shield" looks terribly ugly, and I still need to add a lot of details and a lander

The Soyuz will not be docked all the time; it will actually undock in low Earth orbit after delivering the crew. After the entire journey to Mars or Venus and back, another Soyuz will be launched to bring the crew back to Earth.

hull is BDarmoury panels and everything else is from the kerbal powers series of mods

The new lander (on the right) was able to land close to the base (left), which was always designed to be a base. My Plock base is definitely not a lander from ~300 in-game years ago that didn't have enough fuel to return to orbit.

After 300 years, it's time for a shift change at the Plock base!

I used an array of 8 nuclear engines on the mothership, which gave me loads of Δv to make it to Plock and back home.

(dw about the 1 solar panel on the top I have a few RTG's clipped in it that's just for aesthetics)

I've looked into Sol but i dont have nearly the system requirements to run it with BDB, benjee10's suite and Nertea's suite like i usually do, i use volumentrics v3 and i dont use parallax, so i dont need support for more advanced visuals.

Might have gone autistic with the plane making

As part of my 1990s crewed Mars landing program, this is the design for the Mars Transfer Vehicle, the interplanetary mothership responsible for housing the crew during the journey to/from Mars and conducting the Trans-Mars Injection (TMI), Mars-Orbit-Insertion (MOI), Trans-Earth Injection (TEI) burns.

The vehicle carries the crewed Mars Ascent/Descent Vehicle (MADV) along with the Earth Entry Module (EEM) for high-speed atmospheric return to Earth.

• MADV Breakdown: If you want to see a more detailed breakdown of the MADV carried by this vessel, check out my previous post: Design for a Crewed Mars Ascent/Descent Vehicle

The architecture is derived from the 1968 Boeing IMIS (Integrated Manned Interplanetary Spacecraft) study. However, the configuration was redesigned: by increasing propellant tank diameters, the vehicle eliminates a propulsion stage. Additionally, the Mission Module overall architecture has been redesigned. Finally, while the 1968 Boeing proposal targeted a 1980s launch, this profile is engineered for the 1992–1994 departure window.

Vessel Specifications:

LEO Initial Mass: ~1,200 t

Total Transit Delta V: ~11,000 m/s

Primary Propulsion: 6+1 NERVA-I Nuclear Thermal Rocket Engines

Life Support Endurance: 714 days

Main mods used: RSS/RO/Kerbalism, Bluedog Design Bureau (BDB), NAR MEM (retextured by me), Procedural Parts

Well, this is the upgraded Freya interplanetary spacecraft. Now it uses astrophages for propulsion!

Similarly, it has 3 docking ports for different spacecraft for re-entry kerbin or landing on different planets/moons

It has a centrifuge, a cultivation area, and a science area

It has a total of 180 000 astrophage in this propulsion module

The propulsion module is detachable, in case it runs out of fuel or you want to add a module with more fuel

Any idea which planet I should go to first?

By the way, the astrophage is from the film/book project Hail Mary

My first time going to zore in the minor planet expansion
Here’s a little flyby of the asteroid and after I went into a geostationary orbit around Zore

currently trying to set mine up to work with the game and having no luck. the buttons work, but the stick controls are not doing anything even after fiddling with the settings

Im not sure what conflict could cause this, i have RSE which im believing could be the cause but it would be a shame to remove that

I have a BTDT scanner on my rover on Minmus, however the scanner doesn't show any surface features (from Breaking Ground) in the Instruments view, nor does it add them to the zoom map as the documentation says it should. The scanner works in general, if I place this rover at the KSC it will detect the structures & monolith just fine.

Do I need to do anything else to get the BTDT scanner to work for surface features?

Just Finished A Small mission to Duna with a small satellite Attached

Next stop in my modded Playthrough will be a small asteroid called Zore

Idk if someone has already done this but, I need to do an interstellar mission video and for the smaller missions I am making sponsored rockets and payloads. If you have any suggestion on what other companies's logos I could put on my rockets or if you have something that you'll want to see on there, please let me know here in the comments. also sorry I forgot to install FMRS to recover the boosters, for the next launches it will be installed.

Even though I've spent hundreds of hours playing this game, this is the first time I've ever seen this happen. I knew the Kraken by name, but I'd never encountered it during my games before.

https://reddit.com/link/1w2q2dw/video/2gk5g18h6kmh1/player

I had just started a new session, and this was supposed to be my first satellite mission to Mun.

So I wanted to step up the realism of my launches and make kerbals wear helmets during launch and reentry. Is there a mod for that?

After weeks of assembling my interplanetary vehicle finally fired its engines heading to Duna. This is my first Duna mission too. My kerbals are looking kinda sad.

1. ISRU Processor
   - ISRU processor to make fuel for landers is placed in a 350 km orbit.

2. Refinery Crew Core & Power Module
   - Refinery crew core and power module are docked with the ISRU processor.

3. Main Hab & Docking Module
   - Main Hab and docking module are docked with the combined refinery modules in LKO.

4. Multi-Module Launch — LKO
   - Multi-module launch is docked in LKO:
   - 2x Lunar Lab Modules (LLM)
   - 2x Auxiliary Lunar Orbital Hab (ALOH) modules

5. Final ALOH Module
   - Final ALOH module is docked to the station.
   - Interim GCLS is now complete in LKO.

6. Large Fuel Truss
   - Large fuel truss is launched to LKO.
   - Parked in LKO and later sent to the Mun separately due to mass constraints on the NLTV.

7. NLTV
   - Standard Lunar Commute (LKO → LLO → LKO).
   - Designed to complete two SLC events with a 40 t payload.
   - More SLC events are possible with a lighter payload.
   - Pushes both the I-GCLS and fuel depot module into a stable lunar orbit.

8. Intrepid–Grace
   - CRV-01 Intrepid vehicle.
   - Launches the crew of SSM-08 to open the GCLS.
   - SSM-08 separates the GCLS and mates both halves with the large fuel section, also in orbit around the Mun.

9. LIL-B-01
   - Ore harvester designed to collect and ferry ore to the GCLS.
   - Docks to Port 1 on the refinery module of the GCLS.

10. LIL-B-02
    - Ore harvester designed to collect and ferry ore to the GCLS.
    - Docks to Port 2 on the refinery module of the GCLS.

11. LK-1-01
    - Crewed lunar lander for surface excursions is docked with the GCLS.
    - LK-1-01 undocks to perform free-flight tests, including a low flyover of the lunar surface.
    - LK-1-01 returns to orbit and docks with the GCLS.

12. LK-1-02
    - Crewed lunar lander for surface excursions.
    - LK-1-02 undocks and descends to the lunar surface.
    - SSM-12 spends 5 days on the lunar surface.
    - LK-1-02 ascends to lunar orbit and docks with the GCLS.
    - Awaiting SSM-13 for a smooth and problem-free crew changeover.

OH MY GOD PETER WHAT THE HELL IS THAT THING

I just installed it, and apparently it could make things looks bigger in 4K…but I don’t know why, but this is not working, because things like the rotation gizmo and the mods interface (settings etc) are still incredibly small.
Any clues ?

I’m assuming that I installed it correctly (with CKAN). I’m on MacOS Tahoe.

Making small but visible improvements to driving intelligence and hazard avoidance

Plus sneak peak at my learning transfer pipeline, still under construction