r/MachineEmbroidery • u/Young-Triipp • 16d ago

Brother Se700 help

Enable HLS to view with audio, or disable this notification

My thread keeps shredding and getting tangled in the needle plate anyone got any ideas why this is happening ?

2 Upvotes

100% Upvoted

8 comments sorted by

3

u/Quilter1358 16d ago

Try a new needle with different thread and see what happens.

3

u/WaferAcrobatic2137 15d ago

This was happening to me when I got my brother pe900 and there were a couple of things I did to fix it:
1: change the needle to an embroidery needle, I used the SCHMETZ gold plated titanium embroidery needle size 75/11, I was initially using universal needles and my thread kept breaking

2: the #6 guide bar has a small spring to hold the thread in place and when you change your needle it can sometimes move, mine did so I had to manually put it back

3: tighter hooping, getting the fabric and stabilizer tighter in the hoop helped a lot as well.

Ive only had my machine for about a month but I haven’t had issues since!

2

u/antibiyotikver 16d ago

I'm not used to these small machines but shouldn't the presser foot press firmly on the fabric to keep it stabilized during stitching? It seems yours are always up, far from the fabric? On industrial machines, it presses the fabric down with some force so the fabric doesn't jump up and down causing all he things you report+low quality embroidery.

2

u/Purple_Associate4085 14d ago

Yes, I also thought the presser foot was set pretty high. With a thin woven and no appliques or such it should be set to the lowest possible setting.

1

u/AtomicGreenBean 16d ago

This was happening to me on a different machine when I was using crappy Walmart embroidery thread. I changed to a better thread and it hasn't happened since

1

u/Young-Triipp 16d ago

I’m just using the thread they supplied from brother but I’ll order some different stuff and give that a try

1

u/Lanky-Setting-5288 16d ago

Are you using a quality embroidery thread?

Sometimes changing the needle helps, but this also looks like a tension issue.

1

u/Lanky-Setting-5288 4d ago

Usually changing the needle fixes this, and making sure that the new needle is facing the correct way. Also check that the thread path from the spool is correct.

🍀🧵