3 or so months ago, I planned to get these and the Ramjet+ Afterburner all in bronze. Just recently got my kit and went to buy these, and they aren't even listed on the site anymore—just the G43x and G48. I thought I was losing it, then found it on other sites, but it says "Out of Stock" everywhere. Does anyone know if it will come back, or if because it's been removed from the site, that's it? No more.

Edit: The picture keeps getting deleted every time I post. Even cropped the price out and still deletes it. Smh.

I got a 7.5” 300BLK setup (no adjustable gas block) with a OCL polonium 30 can on it. Haven’t shot it yet, I was just looking on some input on whether I should swap out the charging handle and if it’ll help with the gas. I already know my current set up will be pretty gassy to the face. Any thoughts?

Anyone take a ramjet and afterburner designed for a Gen 4 G19 and ream the barrel to fit 357 Sig in a Glock 32?

Like the title says, the slide is not locking back on the last round.

The build is a G45 with afterburner / ramjet combo, Surefire x300T, Tango Down extended slide release, OEM RSA and OEM mags.

I did swap out the plunger for a NP3 coated version from Overwatch and I believe i may have swapped out the trigger bar for the NP3 version.

My Glock 19 gen 4 also has a Radian afterburner / ramjet with Streamlight HLX light. It has an OP trigger in it and I believe i may have swapped out the plunger as well but its been a long time I cant remember. My G19 locks back all the time with OEM mags.

Ammo being carried in the G45 is Hornady 135gr +P and I practice with Federal AE 124gr. Neither is locking back.

My G19 uses Fed HSTs 124gr and I also practice with Fed AE 124gr. It locks back with both.

A few months ago I bought the Radian RSA kit and swapped in the 15lb spring which chases the slide not to lock back. I swapped back in the OEM RSA and still the same issue. I inserted a blank oem mag into the gun, racked the slide back and it locks.

Im not sure what else I can do.

Thanks for the help.

When will 10 round versions be available for the radian prime on the website every time they restock it won’t let me buy one location: Washington

So when I installed the radian ramjet afterburner, I didn’t realize loctite wasn’t needed. I installed it using a drop of blue loctite.

Now I’m trying to install my suppressor height sights and to access the front sights, I have to remove the barrel and comp.

So far I have broken two torx bits. Completely snapped off. And now the 2nd bit is stuck in the screw.

1.) Any ideas how to remove the snapped bit? It’s sitting flush so I can’t use a tweezer

2.) IF I’m able to get the broken bit out, how should I go about removing the ramjet afterburner??

(Picture for reference)

EDIT: I GOT IT ALL OFF! I stalled the new irons as well. Thank you all for your insight I really appreciate it! And extra thanks to Radian for willing to replace my Ramjet Afterburner! I’m glad I didn’t need to but the fact that yall were down to replace it is amazing!

Swapped from full FDE to adding some Ranger Green. I also decided that the lower 1/3 optic height is a better idea for close range, but my neck pain wants the higher center optical height if I'm going to shoot for longer than 30 min.

Radian builder kit

Muzzle: YHM turbo k, dilligent zilch, cherry bomb. The only thing on this build I would want to change is the can. Really enjoyed the Rhodie 6, but open to suggestions.

Barrel: Geissele 11.5

Internals/controls: Riflespeed adjustable gas block, Geissele SSP and posi-snap safety, Bootleg BCG, JP h2 SCS, FCD buffer tube, kung fu grip, B5 bravo, Reptillia QD, ESD sling, Modlite OKW on Arisaka inline.

Sighting: Magpul buis, 3EIR DIR-one-V, Sig Romeo 4xt pro on Arisaka 2.26, PA 3x Pegasus on Arisaka MMH, TacomHQ Alpha Tarac.

I was running the unity magnifier mounts, but liking the MMH more. I initially liked the flip to center, but I'd regularly bump my tubes under NV. This mount let's me flip it out of the way. I know I could just quick detach the unity, but its easier just to leave everything on, and I dont have to look for those little springs in the dark when I inevitably goof. The kick back in eye relief is a plus, too. Given how much stuff is on the rifle, it's still pretty handy.

Hi guys don’t know if this is the place for this,
but I just got my ramjet/afterburner in and noticed this discoloration on the feed ramp and above was wondering if this was normal or something to watch out for. Figure it’s nothing but I had heard about a bad batch going out and since I bought it from a small dealer I figured I’d ask.

Backstrap and magwell when? 👀

Topic.

Every year I look forward to building a new AR as a personal project in which I treat myself to something cool, something new, something different. It’s been 2 years now and after building my 14.5” 5.56 and my 10.5” 300 black out, I think I’ve lost my desire to do new builds. Simply put, I’m at the point where I have two great working guns and I feel like I any top these anymore. Gone are the days of salivating over my spreadsheets with astronomic totals and the hunt for that out of stock part. I’ve reached the top……now what?

Recently installed a Talon 45/90. Running a geiselle trigger 2 stage. when running on a 90 safety throw I get a clean 2.5lb break.

Installed the talon and I get the same results with the 90 position. when I switch over to the 45 throw. it seems the trigger is getting hung up and not operating correctly. I don't have a scale but I'm putting some weight into the trigger 10lb+

The current setup is the talon in the 90 position but I didn't take a video cause I went to bed lol

I don't know I'm puzzled and tried 3 different selectors. the 45 throw is the only one giving me an issue.

Has anyone come across this before?

I’ve been far too busy to post this, but the finish on my ramjet is looking quite bad - I have 5 other ramjets and this is the only one that has this issue. Anyone know what’s up?

just curious. haven't seen anything floating around the rumor mill

179/250 here! Where my other 249 homies at 👀

And no I’m not a professional photographer.

I took some crappy pictures, plugged them into Chat telling it to, “make them look professional” and this is what it cooked.

Switched to 124 and 147 gr and no longer have ftf issues. About every 50 to 200 rounds, I have a fte issue. I want to mention it only happens on my last couple of rounds in the mag ( i might be getting too comfortable and just letting up on my grip). What is the best and most reliable source for a lighter guide rod, and what weight should I get for gen 5 43x. Have over 1500 rounds through the ramjet and would love to just trust it's and have peace of mind. It's reliable, edc

https://radianweapons.com/product/4th%20of%20July%202026%20Raptor%20+%20Talon%20Combo

Anybody know where/when I can score a AB/RJ for a MR920? I know I can use the g19.3 but I’d like the one that fits the slide a littler better.