r/crawling • u/xDooBob607x • 1d ago

SCX24 Receiver help

Gallery image

Gallery image

Gallery image

Gallery image

The receiver and remote that came shipped together won't connect to each other. I've paired them multiple times and they just won't connect to each other. It didn't come with a wire to connect them physically so I've just been trying to sync the receiver to the remote and it refuses to connect. Help would be appreciated

3 Upvotes

100% Upvoted

6 comments sorted by

1

u/MarsGlez 23h ago

What is your binding sequence if I may ask?

Would be difficult to help you if we don’t know what you have tried in the first place.

Those are DumboRC rebranded, don’t need a wire. Receiver has a button that you need to hold around 5 secs until it flashes quickly.

1

u/xDooBob607x 21h ago

Just the instructions and random orders after, I've tried keeping them close, moving them apart. I've tried moving the wheel around so the transmitter sends more of a signal. Every time it just slow blinks green, then I hold the button to get it in code matching mode and it lasts about 5 seconds and goes back to slow blinking green

1

u/MarsGlez 20h ago

If that’s the case, I’d contact injora for replacements. If the Rx is effectively entering bind mode (quick flashes) and you tx is already on when the Rx enters bind mode, then there is an issue.

By any chance you have another DumboRC tx or Rx to check where the fault might be?

1

u/xDooBob607x 20h ago

I do have a fms bronco that uses the same receiver/transmitter. I tried out of spite turning it on to see if it would connect to that one and still nothing. I would assume that means the receiver could be the issue?

1

u/MarsGlez 20h ago

I would think so, yes.

Can you bind the tx to your FMS?

1

u/xDooBob607x 18h ago

Ooo I could try that when I get home later