Is the back wheel a ticking time bomb, absolutely. 😂
Had the spinergy set for 6 years. Finally got around to converting the back wheel.

Me quiero comprar este cuadro por Wallapop pero no sé qué talla es y el vendedor aún no me responde.
Que talla dirían que es?

Woohoo bike out of Vietnam. Unfortunately I'm in the states. I'm sure I could import, but that seems like a lot. Anyone seen anything like this?

hey all! i got this ‘83 peugeot for STUPID cheap to convert into a fixed gear, but in my excitement picking it up didn’t notice the frame is a biiit large for me.

it seems to be around 58cm (i usually ride a 54cm) and i’m only about 5’8 - 5’9 in height. top tube sits juuuust about at my crotch.

im picking up a seat with higher rails later today to help bring it up a tad (i still had a bit of room before my leg was over-extended) and throwing on a shorter stem, but is there anything else i can do? would running shorter cranks help?

i dont plan to commute this bike or anything i hardly ride for more than 2-3 hours a day. should i just can the idea of messing with this bike and hope i find another? thanks in advance!

EDIT: to clarify over my last sentence… i do already have a seperate, proper fitting bike. so this is purely for the case of fun, whimsy, and using what i already have on hand

Hi sorry, VERY noob here. I have no knowledge on bikes, picked up this used one to learn about bicycling and fixed gears. Does this sound right to you guys? I was riding it today and it just sounds and feels slightly rough. Thank you so much for

After today, I've decided to hang up the fixie and stop biking.

If anyone is interested in a dura ace hub or suntour Superbe crank with bb let me know. It was an honor.

Quality or crap?

I purchased a 2008 schwinn Madison a few months ago. The bike has been riding amazing except for recently the back wheel has been slipping. If I put a lot of force into the back wheel, the wheel will rotate around in the drop outs. Is there a way to stop this? Any help would be appreciated!

Here we have a Raleigh Grand Prix that needed to fill a gap in my bike lineup so here lies my first attempt at a fixie built with nothing but spare parts I had laying around. I see the allure now, I love the bare bones frame. I need to pick some grips up but this was from an intial test ride ! (:

so i genuinely need suggestions or guidance from you guys, so i want to buy a fixed gear bike sooo much as im gonna have some money from my internship, but i wanna buy a camera as well as im really into photography

i do have a road bike rn, i converted it into a fixe but kept having issues with the chain as the bike didnt have adjustable dropouts so i had to finally put gears back on it

im also trying to sell that but no luck so far

I'm also into photography, i like to take pictures of people to capture their lives, i cant use my phone as it gets really hard to explain that to a stranger that you are not a pervert if you are taking pictures of them on a phone

sooo

what should i do??

fixe is a little expensive as well and i may have to ask my folks for some help , i really like tsunami on ali express

anyone can help me make up my mind

dolan df3 is somewhat of an attainable dream frameset for me, BUT. I’m approximately 190 cm tall, and this particular frame seems to be way too small for me. the seller pointed it out in the ad, but only put the measurement from center of BB to the top of the saddle as pictured (74 cm). I’ve measured the same thing on my current bike, and it was ~75-76 cm. also, on this bike, the cockpit is raised due to spacers and handlebars. I like the overall look of it, also, I know that I can tweak the fit, but if this frame is waaay to small, I will hit an adjustment ceiling at some point, if you can put it this way. do y’all think i should give it a go? they are really hard to come by where i’m from, also, in my size the rarity multiplies. should i try it or should i wait/search for my size?

Up for sale is a brand new, never-mounted KS LEV Ci Carbon Dropper Seatpost (27.2mm diameter) 120mm travel paired with a brand new Wolf Tooth Remote lever.

I purchased this high-end setup (the post alone retails for over $300) for a build that went in a different direction, so it has sat safely stored and never saw a single trail mile. It is in pristine condition.

Included in Listing:
KS LEV Ci Carbon Dropper Seatpost (27.2mm diameter) 120mm travel
Wolf Tooth Remote Lever with handlebar clamp
New shift cable and outer housing
Original KS User Manual
Why this setup?
At 27.2mm with a carbon fiber body, this is one of the lightest and slickest dropper upgrades available for gravel bikes, cross-country hardtails, or bikepacking rigs. Combined with the gold-standard action of the Wolf Tooth lever, it’s a huge performance upgrade over standard posts.

Will be packaged with plenty of protective wrap and shipped quickly. Feel free to send a message if you have any fitment questions! [eBay Listing Link](https://ebay.io/m/Lo8zTV)

I want to get Upgrade from my bike, I currently have a weapon bullet . i was looking online and saw a argon 18 electron for a good price and wondered if it is a upgrade

I just bought a new fixie used but it came with shitty parts and need a new chain ring and cranks, do people like the AFFINITY PRO TRACK CHAIN RINGS and are there chain rings that are more bang for your buck, and what are the best budget cransets that will last a long time.

Hej!
Jeg går med en drøm om at køre på en Fixie cykel!
Markedet synes jeg dog er svært at finde rundt i.
Jeg har fundet denne side i EU (https://www.santafixie.dk), men jeg synes godt nok de har blandede anmeldelser.
Er der nogen som har erfaring med dem, som kunne fortælle mig om deres oplevelser?

ELLER

Er der nogen som kender andre solide hjemme sider til FIXIE cykler?

Hey everyone, I’m looking to upgrade my fixie without spending a ton, and I’ve been looking at AliExpress since some of the parts seem significantly cheaper than buying everything from bigger brands.
For those who have experience with AliExpress bike parts, what would you actually recommend buying from there, and what should I avoid?
I’m mainly looking at stuff like:

Forks
Stems
Seatposts
Handlebars
Grips
Cranks/chainrings
Cogs/rear cogs
Pedals
Possibly wheelsets

I’m not looking to cheap out on safety-critical stuff, and I’d probably spend more on anything where quality/reliability really matters. I’m mainly trying to figure out which components are good value on AliExpress versus which ones are better bought from established brands.
If you’ve bought any AliExpress parts for your fixie/track bike that have held up well, I’d really appreciate specific recommendations or links. Also interested in hearing about parts that you bought and would NOT recommend.

Just trying to upgrade on a budget without ending up with junk

Just got my first fixed gear setup from a friend who’s moving. I’m a road biker and have a fancy carbon setup, but I can’t figure out how to ride this fixie. How do you brake properly? Also, I can’t turn the handlebars more than a few degrees before the front wheel smacks the pedals. I feel like I’m not understanding how this thing works. Any advice

Hey everyone,

I currently ride a fixie with horizontal track dropouts, but I’ve been wanting to build something around a Cannondale CAAD4 Saeco USA Team for a while. The CAAD4 Saeco has honestly been one of my dream frames, and I’ve found one that I’m seriously considering buying.

I know it has road-bike style rear dropouts rather than traditional horizontal track dropouts, so I’m wondering how realistic it would be to turn it into a true fixed gear.

A few questions:

• Is it possible to run a true fixed cog safely on this frame?
• What would be the best way to deal with chain tension?
• Would a chain tensioner be suitable for a fixed gear, or should I look at something like a magic gear / eccentric hub?
• Is there anything specific about the CAAD4 dropout that would make this a bad idea?
• Has anyone here actually built a CAAD4 or similar Cannondale as a fixed gear?

I already have a horizontal-dropout fixie, so I know what the usual setup is. I’d just really love to have the CAAD4 Saeco as a fixed gear if there’s a good way to do it without compromising the frame.

Thank you all for the help

Forsale fixed gear bike
Refs hindi na nagagamit wala na sa prime hehe.

Frame
Tsunami size 58

Cockpit
Pro vide 7s 130mm stem
Prolite 44mm
The project seatpost uncutted
Fabric scoop saddle

Crankset
Skeace 49t
Izumi chain
Shimano rb cleats

Wheelset
Power play 24/24 40mm
Solon fh/tecnic rh 24/
Sworks 26c front
Contenental 25

14k negotiable
Loc: manila