r/zx10r • u/TaprACk-B • 23d ago

Phone mounts

Post image

Just purchased a 26’ zx10r on Wednesday.
Getting it lowered and a few other items done before taking delivery. What case/ mounts does everyone use to work with the steering stabilizer?
Looks like a stem mount will work but not sure ,??
Thanks is advance.

30 Upvotes

95% Upvoted

33 comments sorted by

7

u/AnotherRandomHavel 23d ago

You need the quadlock m8 bolt mount and that'll go where your steering stabilizer bolt is

Dont lower it. Thats stupid and completely ruins the ride.

4

u/PurpleLlamaKing 23d ago

Did this for my 25 Zx10r works great although you have to look straight down to check your phone while it's mounted

2

u/TaprACk-B 23d ago

I’m short and want to be comfortable when I’m at a light. Functional not for looks

2

u/AnotherRandomHavel 22d ago

Forgive me and carry on then!

1

u/TaprACk-B 22d ago

No worries at all. I’m hoping it doesn’t mess with the ride. I was an adamant with the dealer/ about not wanting to mess with anything just wanted more stability when stationary

1

u/TaprACk-B 23d ago

Sounds like quad lock is the ticket. Thanks for the info

2

u/Bammer1986 22d ago

I have a RockBros mount that came with mine when j bought it. It works pretty good

3

u/hchristianj 23d ago

Stem mount works well

3

u/arawnamusly 23d ago

Quad lock with the anti vibration attachment fyi

1

u/TaprACk-B 23d ago

Thank you for the info

2

u/iivWade 23d ago

Quad lock

2

u/snampro 23d ago

Tip i got on reddit that works great: i use an old phone on the mount and have my working phone in my pocket running a Hotspot

1

u/TaprACk-B 23d ago

That’s an epic life hack, this way if it falls off not a total loss. Genius.

2

u/AssassinStig 23d ago

I actually used a quad lock stick on wall mount. Put it in the nice phone sized rectangle on the tank. I had the vibration dampner so it was raised but it was out of the way of the bars and screen. Didn't get in my way when I was tucked on high speed runs. I did basically have to look down to see it but I didn't look at it much while riding. Gps sometimes and swipe for music change.

2

u/TaprACk-B 23d ago

That’s an excellent idea. No issues with the adhesive?

1

u/AssassinStig 22d ago

None. 160+ no issues. Fully in the windshieds protection. Worked great.

2

u/TaprACk-B 23d ago

GPS and music will be the only things id need for anyway.

2

u/Ashamed-Ad-8825 23d ago

I have the MH-PRO No Vibration. Works great, no need to buy any bolts etc... Easy to attach to any bike and has a wide variety of positions/angles to play with.

2

u/axselconsten 23d ago

I’m running a set of spacers under the steering stabilizer. Then I have a quad lock steering stem mount with an anti vibration mount. It tilts enough so the phone is in landscape style sits just under the TFT in your line of sight. That’s the only way I could figure out how to have my cake and eat it too. I thought of all sorts of other ways but that was the easiest solution. I forget where I ordered the risers but they were only like $10-20 online. Anyways hope that helps

1

u/TaprACk-B 22d ago

Thanks for the info. I’ve seen type of spacers available through quad lock and rockform
Will definitely add to my order

2

u/rada007 23d ago

This guy is a genius. Check his channel. Perfect solution for phone mount.

https://youtu.be/M37Hs16sDQs?is=-ih3dRLOUu25vZL5

1

u/TaprACk-B 22d ago

Thanks I scope it out

1

u/TaprACk-B 22d ago

This is probably the easiest and cheapest way. Pretty awesome idea

2

u/RmXiV 22d ago

No phone mount, phones are a distraction

2

u/TaprACk-B 22d ago

Valid point

2

u/ldr976 20d ago

Ride the bike with your eyes on the road and know where you’re going before you get on it? Nothing on your phone is so important it needs to be a foot from your face on a liter bike…

1

u/TaprACk-B 20d ago

Thank you for your advice.

2

u/Thateskimodude 18d ago

I'm using Quad Lock Handlebar mount but replaced the steering damper bolt instead so it's on top of the steering damper

1

u/TaprACk-B 18d ago

Thanks for the info. I’ve seen a couple recommendations of replacing the bolt to add the mount

2

u/Legitimate-Might260 17d ago

Brock’s makes a stabilizer “riser” so you can fit the quad lock into the center stem. You can also go with a sticky adhesive quad lock for the tank that works well. Def look into the Brock’s
https://brocksperformance.com/steering-damper-riser-kit-zx-10r-16-26/?setCurrencyId=1&sku=930567&tw_source=google&tw_adid=&tw_campaign=21584086699&tw_kwdid=&gad_source=1&gad_campaignid=21580427024&gbraid=0AAAAAD2O1svB0peFQT30EAav1hhmtTRnF&gclid=Cj0KCQjwnIDUBhDrARIsAJDGwSt2YrTwfSFPKiZy5jJ8Z_-UUQL0v9tEkWyZIVVBMQ7DbWlO2Gc43WoaAmACEALw_wcB

1

u/TaprACk-B 17d ago

Thank you kindly for the detailed information. I appreciate you taking the time to do so.

1

u/TaprACk-B 23d ago

Thanks for the advice, I appreciate it greatly