So here continuing to part two we have my kit. The building we're in is my woodworking shop. It's primarily used for building bamboo fly rods and it's where I do​ Flint napping, And canoe building as well. The animals my buddy Francis. he's a funny donkey. he thinks if he hides behind the tree I can't see him. he's trying to sneak up on me so he can steal the Sweet treats I have in a bucket but I'm on to him.

Ty

Has anyone here used Bundeswehr surplus for bushcraft? 🇩🇪🌲 I’m curious which pieces you’ve found genuinely useful for camping and spending time outdoors.
Things like the Feldhemd, Feldhose, rucksack, canteen, shelter equipment, cooking gear, sleeping gear, or other Bundeswehr surplus. What are your favorite pieces, and what would you recommend to someone putting together a bushcraft setup?

Feral rod knives of Alaska hunters hatchet Bush camp knife takedown bow made by bear full camp mess gear fire kit including tinderbox and fire piston. Geology compass. this is the culmination of 30 years of experience.

I used traditional methods, only substituting wire for the bindings. All the wood was split with wedges only using hand tools.

.

Petromax Wrought Iron Frying Pan

Cast iron is awesome, it lasts forever, and it is the ultimate prepper gear. But it is really heavy! I have quite a bit of cast iron gear, but I find it impractical for trips. Instead, I bought a Petromax wrought iron frying pan. It is one kilo lighter than a cast iron pan of the same size.

I bought the pan with a diameter of 24 cm. The weight difference compared to the 20 cm pan is minimal (which surprised me a lot), but the larger size gives you enough room for, e.g., 2 steaks.

To prepare the pan, I coated it with a thin layer of rapeseed oil and baked it for 1 hour at 220°C in the oven. I repeated this 3 times before taking it over the fire.

I have now used it pretty much all summer, and I am a huge fan. Most of the time, I use Palmin as the cooking fat. It does not burn like other fats and butter. It also does not go rancid, so it is pretty much perfect to bring on a trip. My Palmin is wrapped in baking paper and kept in my German butter dish (a brilliant piece of gear).

In the morning, I am hungry and impatient, so there has not been much cooking on the pan over embers – it has been full blast on the flames. Despite that, I have not managed to burn anything even once, so the pan seems to work perfectly.

Cleaning is done by scraping it clean with a wooden spatula and maybe wiping it over with a wet wipe. When I have returned home after trips, it has simply been given a thin layer of rapeseed oil with a cloth.

So, I can definitely give this pan a huge recommendation. A completely brilliant piece of gear.

Naturally, I have upgraded the pan. I have never burned myself, because I have simply been wearing gloves. Still, I wanted to make a handle for the pan. A beech branch split into two halves, and then I carved a recess into it so it fits over the metal handle. I had to drill off the Petromax logo, which was held on with a couple of pop rivets.

I had some magnets left over from a mosquito net project. Thin, long magnets. So I carved a hole in the handle and pressed the magnets into it. They fit pretty tightly, but I still gave them a bit of epoxy to make sure they stayed firmly in place.

The patterns in the handle were burned in with a metal barbecue skewer over the fire, so that took quite a while. I gave it the burned look with a gas burner at home.

The handle works perfectly, and it is no longer necessary to use a glove when working with the pan. When the pan is attached to my backpack, the handle is simply removed and kept in a pocket.

The pan is actually so nice that I have also used it quite a bit in the kitchen indoors and on the wood-burning stove in the living room. It is just great to cook with.

Is there any reason to take cast iron over wrought iron? Other than longevity?

Source: Rosentjoern International Blogspot (also to be found on YouTube)

So for moras I currently have a companion stainless, kansbol, pro s, and robust. Wanting to get another heavier use mora and can't decide between a bushcraft black, companion hd or companion hd stainless. I'm leaning towards the bushcraft black but not sure. I wear xl gloves for sizing. I live in PNW Washington, lots of rain and moisture. Thank you

Hello, I don't know if it's right place to ask but it's getting desperated, lol.

I found this video about how to turn tarp/blanket into backpack( https://youtu.be/3hmdXbSj9I4?si=rrUXt_dm8MjSQz_2 ), and for last few hours I've been trying to understand what kind of shenanigans he did at 2:10. I watched at 0.25x speed, listened to every word, wrote them down, googled every term he used, did everything step by step, yet I wasn't able to understand and how he does it, and wasn't able to get the same result. It feels like this knot is impossible or requires some cosmic knowledge and few sacrifices.

Upd: To specify what exactly I don't understand: When he tightens the rope after feeding the bowline twice he gets to make a loop. When I do the same the only loop I get to make is the loop the loosens everything and whole thing falls apart. I don't really understand where he gets this loop and second one to tight it and have this quick release system.

Then if you ever need to defend yourself and someone grabs the end of the bat, all they'll get is the sock.

Putting together a lightweight setup and scored this Tramontina stainless baby machete (banana for scale) with some interesting aspects I am wondering about.

3 questions wise bushcrafters:

1-that is a scoring notch yes? For scoring bone etc? Should I sharpen it up a bit?

2-the serrations need to be sharpened but how would you best use them? Figuring for fibrous materials etc. I’ll use it but wondering if there were other uses it might be optimal?

3-the round hole? For what? Straightening arrows? Affixing to a spear? For a bow drill?

Got out after work today and set up my little camp for the night.

Been raining on and off since I got here, but that was kinda the reason I wanted to come out anyway. Tarp is up, sleeping bag and mat are dry, lantern is on and I’ve got some hot ramen going.

Also got the shit scared out of me by a tiny lizard earlier 😂

Hi, thinking of either Finn Lite from bps knives or Bushmate 2.0.

How to treat the blade before usage, I'v got comment some people use vinegar, can someone describe briefly or advice otherwise?

Thanks! Nice weekend to everyone

So this is my first post and im looking to make a purchase on my first fixed blade and I’ve narrowed it down to these two choices im pretty much almost sold on the ursus but why would someone spend the extra $150 on the reiff if they both have the same blade steel basically the same amazing lifetime warranty and both have kydex sheaths (i prefer the ferro rod setup on the ursus). My use case for this knife would be to mount on a plate carrier as a shtf knife and double down on the weekends when camping or long hikes. Maybe someone can explain the actual differences and tell me which knife is more slicey out of the box or what each one excels at vs the other. Thanks in advance

Very good website I've found, hasn't been updated since 2011 but contains useful information on shelter building, fire making, cordage, traps, snares and other general bushcraft information.

Hi, I'm in the process of making a backpack/sling bag for my a minimalist bushcraft kit

At first, I wanted to make a veshmeshok (old Russian design) style sling bag; around 10" x 30", wearing it over one shoulder in the back. In fact, it would kind off look like a back quiver.

But I started wondering if just a drawstring bag with one strap wouldn't work better? Do any of you have experience with veshmeshok style bags? Do they offer any advantage or disadvantage to a drawstring bag?

Hi, I have collected quiet a few pieces of what may be suitable for pipes, mostly chopped fruit trees Apple, Pear and I think cherry tree, plum aswell.

Im considering new bushcraft knife, with main purpose camping, carving walking sticks or random stuff while campfire, but mainly would like to try pipes. Is scotch Auger I ordered 20mm one sufficient? 10mm I thought was too small and AI researched that 20mm might fit to make bowl easier.

When it comes to knife....BPS bushmate 2.0, Finn Lite or Mora 510?

I found quiet nice limited edition of Mora 510, but Dont know if for stem making Is a good fit, or overall

If there are some bushcraft type pipe makers please, share Your experiences ....tools, type of Wood

Last thing oil, Its a birthday gift So willing to invest into some fine conservation oil

Thanks!

I like dangling my Morakniv Garberg tip up for ease of retrieval. But I don't fully trust the Morakniv sheath's retention while hiking long distance.

So, when I am not actively unsheathing and sheathing the knife repeatedly, I pass a loop over and feed my lanyard through the sheath dangler loop to strengthen the knife retention while hiking.

I also like having a bright and reflective lanyard for helping to find my knife if I absent mindedly sit it down.