I have a sizeable amount of shake that I want to make MCT oil tincture from. The shake has already been screened to scrape some of the good stuff off the top for hash making but there's still a lot there. The only problem is that its potency is lower. I wouldn't say I need to vape 2x the same amount of this shake to get an equivalent high but it's probably more along the lines of 1.5x

I have already water cured and dried a bunch and am going to decarb it sometime in the next few days. I want to try 42g of decarb to 240ml of MCT. Some of the searches I've done say this could be kind of thick and difficult to strain and others say "no problem".

What say you r/CannabisExtracts, will 1.5oz of decarb to 1 cup of MCT strain OK?

This is my first ever cart ive ever created🥹, its beautiful Made out of tropic thunder badder we cooked it on 240° F for 45 minutes, use about 1.35 g and it tastes and smokes good a bit hard to pull tho, had to run a hair dryer over it and it was a bit thick and wouldnt go into the syringe but pretty good for a first try, me gramps and my gf made it😊

Stopped at SunnySide to pick up some fresh concentrate and snagged these three. These concentrates were priced at $40% off on 3 or more! I didn't have to think twice for a deal like that.

Im consider buying this BHO-extractor, but I’ve got a couple of (probably dumb) questions about it.

https://www.amazon.de/Bonxrdun-Extractor-Stainless-Extracting-Laboratory/dp/B0D4TXZJZT/ref=mp_s_a_1_4?crid=KVEKAK7VH47M&dib=eyJ2IjoiMSJ9.tayjDEGgOJxpFYUENJxMpgAdX4ssFSG8jMNIFIXBR3c.M9IPQU2L8SdsHeADrcr9DgZgDHBbVGWpsDP40dvfb5g&dib_tag=se&keywords=closed+loop+bho+extractor&qid=1788095489&sprefix=%2Caps%2C214&sr=8-4

Does it need to vacuumed out, before filling with gas?
I assume so, but confirmation would be great!

And if yes, would the vacuum pump in this kit (that’s under the “products related to this product” category) be ok for the job?

https://www.amazon.de/-/en/VEVOR-Chamber-Stainless-Degassing-Silicone/dp/B0DQ3Z2N16/ref=pd_aw_subss_hxwPER_sspa_mw_detail_m_sccl_1_1/703-4070698-6196904?pd_rd_r=93272bcc-2beb-417e-a056-7986bc400aac&pd_rd_wg=jtmZI&pd_rd_w=FEbm0&pd_rd_i=B0DQ3Z2N16&psc=1

The attachments for the hose looks like the right one, but I just want to be sure, before I order.

Any help/tips, will be much appreciated.

And I’m not new to making live resin, but I want to up my game a bit, and get a bit more proper gear.

Following this post: https://www.reddit.com/r/CannabisExtracts/comments/1w1yowa/rosin_or_bho/

After changing the container of the extract and mixing it with a dabbing tool it looks completely different. Do y'all still have the same examination result?

Not in a legal state. I usually go to michigan and stock up, but i am waiting on a drivers license replacement in the mail. I made the mistake id buyinh this from a plug. It smells just like super bottom barrel wax ive bought from dispos before but something seems off about this. Its a pretry smooth smoke. Not much flavor, but gives me a but of a headache and hangover the next day.

Hey guys, could you help me to identify if this extract is rosin or BHO?

I just took it out from the fridge. It was sold to me as rosin from ice cream cake strain but I still have a doubt. I paid 60 EUR (around $70) per gram.

I smoke quality dry sift for a long time but i'm pretty new to other types of extractions.

Video was taken with flash on.

Thank you!

Cheers, yall. Got my hands on some Omakase Farms stuff so I did a sesh and review

Rosin: Forged Carbon, Pre 98 Kush

Squisha T x Omakase Farms Thumbprint: Orange Mintz + Zeltzer

Flower strains are Watermelon Laterz and Zeclair!

There are closeups of everything as usual. Come smoke/dab along!

1 spray 20mg of THC, i tooj like 5 and im flying right now xd

Cold cured for 1 month

First go at bho how did I do

It smells normal and looks right but it tastes like plastic no matter how I smoke it? I'm really not sure what to do

Hey zusammen ✌️
ich hatte Slou Z Kush 27/1 aus der Apo. Hat mich unter 4 € pro Gramm gekostet und bei mir kamen ungefähr 1 g Rosin aus 5 g raus. 🔥
Das Demecan Bubba Kush Rosin aus der Apo war bei mir dagegen eher hell und schön buttrig/cremig. Mein selbst gepresstes Rosin ist bisher eher zäh und klebrig geworden. Von der Wirkung her aber echt nicht schlecht und knallt gut 😄
Ich presse mit einer 5-Tonnen-Presse und wollte mal fragen, welche Apo-Sorten ihr aktuell empfehlen könnt, die nicht zu teuer sind, einen guten Ertrag bringen, geschmacklich was können und auch ordentlich wirken. 🙏
Bin auch für Tipps zu Bags, Temperatur und allem anderen dankbar. ✌️

New home. Sat down after a long moving day, broke out the blazer torch and went to town. First session, already had the smoke detector going off, and this was only from the heat i believe. Just from the nail heating up. Idfk . There are detectors in every room but the bathroom, but every single room has sprinklers.

Is the eRig the only real option here? What would you suggest, for an eRig? Is there one that can plug in and be good, like even if the battery is dead?
Or long battery life is important. I don’t know, I’d like your input. Thank you .

Disclosure: I work on Japan's hemp expo, so I have a stake in the topic. Not selling anything, no link.

Thought this might be an interesting contrast for people here. Japan draws the line completely differently from anywhere in the US:

- THC is prohibited outright. Not a 0.3 percent threshold, not a hemp loophole. Outright, with real criminal penalties.

- CBD is legal and sold in normal shops.

- So the entire extract category here is isolate and broad spectrum. Full spectrum as you know it basically cannot exist legally.

The practical consequence is that everything hinges on the COA. Producers here obsess over non-detect results in a way that would look paranoid in a US context, because a trace reading isn't a compliance headache, it's a customs seizure or worse.

It also means the flavour and terpene work is completely decoupled from cannabinoid content. Terpenes get added back from non-cannabis sources, since anything cannabis-derived carries risk. Whether that counts as a real extract is a fair argument.

Curious how that reads to people who work with full spectrum. Does isolate plus reintroduced terps ever get close, or is the ceiling just lower?

When I first got into cannabis processing (before you could ask AI everything) I had a hard time figuring out formulation math. Every type of product required a slightly different approach.

I ended up building a collection of spreadsheets, one per product category. We’d enter the potency of the material we were using, and the spreadsheet would calculate the ingredient amounts needed to reach the target dose and quantity.

As we added more products/recipes, the spreadsheets became more and more difficult to manage. I’d accidentally delete a formula, a recipe would change and need to be updated in several places, or I’d find myself trying to formulate with scraps from four different jars with different potencies.

So I spent the last year building Batch Flows. It’s primarily designed for manufacturers managing lots of products (gummies, tinctures, vapes, and so on) but there’s also a free version for people working with fewer recipes.

It's more than someone needs for an occasional gummy cook at home, but the underlying formulation math is the same, and it gives you the option to scale the recipe up based on how much you want to make. I wanted to share it in case anyone is interested in making that part of the process easier or simply doesn’t know where to begin.

It’s called Batch Flows: https://www.batchflows.com

If it's helpful for you, fuck yeah. Regardless, I’m happy to answer any questions about formulation, concentrates, pectin vs. gelatin gummies, or anything else!

The lighting in here sucks but I finally got my hands on a pollen tumbler that is made for dry ice. It has exceeded its expectations so I’m going to press a good amount. I’ve pressed flower plenty of times and I’m leaving it loose in the premold press just like I do flower, then I will put it overnight in the vcure to get the humidity right at 62. Is this the right way for just pollen? Any tips I will take because I don’t want to waste any and what micron would you use? I used my smallest micron for this step. I will be using my dab press 10 ton I think it’s a 3x5 plate.