SOTD: 09/01/2026

Razor: Gillette Slim Adjustable Prospector H3
Blade: Personna GEM DE, 1st use
Brush: Rad Dinosaur Creations Chathogany Manchuridon Badger
Preshave: Razor Emporium pre-shave soap
Soap: Tabac Puck
Aftershave: Tabac Classic Aftershave
Balm: Nivea Sensitive Balm
Additional Care: Alum Rock
Fragrance: Stirling Green - Solid Cologne

After 31 days of the same kit, it is a pleasure to try something new. Using the Slim felt like I had training won on comparison to the MMOC. Despite nearly no blade feel, all I needed was 2 passes for a near BBS. An excellent shave.

- Shared from My Shave Den for iOS

Palate cleanser

• Brush: Simpson T3
• Razor: Henson Ti22+
• Blade: Personna Comfort Coated (2)
• Lather: Lucky Tiger
• Post Shave: Lucky Tiger After Shave & Face Tonic

Second day of using Lucky Tiger products for the week, just with a different brush the day before. Running low on the product so I will re-purchase because of how well it performs. Next week it's back to the pucks & tubs.

Henson Ti+, Bic Chrome blade, Yaqi tuxedo 24mm synthetic brush, Zingari man The Wanderer, Thayers and Clubman Pinaud.

Lovely two pass shave today. WTG & XTG and no touch ups needed so very pleased. It’s been a while since I used my Henson and it didn’t disappoint. Smooth and trouble free.

I had been looking forward to trying my new soap and it was well worth the wait. Lovely clean scent that I am finding really difficult to label. I find it a lovely barbershop with a bit of spice and clean detergent. Told you I was struggling to label it! My wife and even our neighbour, who was visiting said what a lovely scent I was giving off so it definitely got a thumbs up. The lather was very rich, it can take a ton of water and the slickness is great and so is the residual slickness. It paired lovely with the clubman and left my skin feeling great. Really looking forward to trying the soap with my boar brushes.

After Austere August, I’m presenting “Splurge September” entry #1.

Razor: Oliworks Meteorite SS (medium plate)
Blade: Personna Gem PDG
Brush: Terry’s Soap
Soap/AS: Terry’s Soap Mysterious Barbershop

Despite the extreme heat where I live, all of Terry’s Soap products have arrived in flawless condition. I’ve seen users receiving defective soaps due to the heat, but this is never an issue with Terry’s. His soaps come with a clear protective piece on top when you open the container. I presume this preserves the soap. Terry’s stuff is high quality and he really knows what he is doing.

For me, Mysterious Barbershop opens as a splash of citrus followed by spicy and leather notes. I’m also getting a bit of an earthy vibe. I imagine this as a luxury barbershop that’s sitting in the middle of an open forest. It’s a classy, unique fragrance. The scent is very pleasing and indeed mysterious.

As always, Terry’s Soap delivers an incredibly slick lather with immense volume and ample cushioning. His after shaves are also a real treat. A nice tingle when first applied, followed by a quick dry-down and a silky smooth finish to the skin. Incredible post-shave feeling with great healing properties, zero residue left behind and a pleasant, well-balanced lingering scent.

It was raining heavily today so I took out my Noble Otter Jasmine Green Tea which i have never used before. Bought it around 6 months ago, took a sniff and found it to be special and today seemed like a perfect time to open it and it didn't disappoint.

Brush: Yaqi Caramel

Razor: R96

Blade: Astra Blue

Post shave: Alum + Nat Habit Lavendar Jal

Another instance of you should take u/ EnvironmentalOil8616 recommendations seriously. The lavendar Jal is gentle on the skin and a great scent.

Personally not a fan of astra blue but the soap and the after shave elevated the overall experince. The post shave feel was just

Will give a 🌟🌟🌟🌟🌟 for the soap.

Last week I was doing yet more research on how to shave without my skin completely exploding with irritation. I’d tried cartridges, electric razors, straight razors, all to no avail (though I’m sure the straight razor failing was due to my own inept and cheap equipment). Nonetheless, I stumbled upon this subreddit NUMEROUS times when searching “Best DE Razor”, “Best Shaving Cream”, “Best Blades” (trust me, I ordered a sample kit first), “Best Brushes”, etc.

Well I ended up buying a Mhule R89 with an Astra Stainless (currently) and a Prosaso Brush, Cream, and After Lotion. I was able to use it for the very first time 30 minutes ago.

IT WAS LIFE CHANGING!!!

I’m writing this now with literally no bumps and no irritation. I know I didn’t lather the cream enough, and I know that I didn’t always go with the grain, but it was honestly the best shave I’ve never had. And with the help of a couple YouTube tutorials, it was so incredibly approachable - dare I say easy - unlike the straight razor I had been trying to use.

So why write this long post you might ask. Well I’m nonbinary, and quickly before there are any knee jerk reactions, I’m not here to debate, argue, or proselytize.

Shaving just makes me feel better about myself. It makes me feel more genuine. Being able to shave while not having to worry and dread the inevitable irritation that comes with it is truly a godsend and blessing. So thank you so so much from the bottom of my heart.

​

\ **Face Wash:** Cold Water.*

\ **Brush:** DS Cosmetic - Boti 25mm synthetic badger .*

\ **Razor:** Ever-Ready - Streamline Ambassador.*

\ **Blade:** Personna- Gem PTFE (3)*

\ **Lather:** Ach Brito - Lavanda cream.*

\ **Post Shave:** Denim - Original ASL.*

\ **Post Shave:** CeraVe- Moisturising lotion.*

\ **Tags:** $Discord*

Back to good smells and variety God I love Denim. The Streamline was its usual noisy self.

Sufficiently different from Zingari Man's Coconut Nanas, even though the scent profile is very similar. Top tier base, as always with Noble Otter.

Overview and Features:

Brass, you either love it or hate it. Keep in mind it oxidizes and does require regular polishing (or you can keep it savage, depending on how you like it). Small razor, yet quite heavy. Generous blade reveal from the top cap, with a fair bit of blade bend. Very small blade gap, wide lather channels but hard to clean properly due to the slotted design, a toothpick and/or cotton swab is recommended once in a while since soap scum does get trapped over there. No clogging issues within the 2 - 3 days of growth. Base plate corners are quite pointy, but haven't bothered me personally (not a head shaver tho). Note, the threaded post on the top cap is ever so slightly shorter than on most razors I've seen.

Feel:

Zero blade feel whatsoever, super mild razor although the surprising exposure value. Some chatter ATG due to the blade reveal, and some smoothness to be lost due to the higher friction brass tends to make against the skin (at least personally). Efficiency does vary when playing around with the angle, but it never really gets super close. Very nice handle in my opinion, excellent grip and interesting different design.

Final Thoughts:

Exceptional build quality, tight tolerances and neat details. Superb matte factory finish, later polishings might affect it. Fair price for a CNC machined razor I’d say. Recommended to beginners? Hard to knick yourself, but be careful not to run too many passes because that’s the way this razor makes you lean towards. Probably aimed more towards every-other-day shaves, keeping it as delicate as possible. Definitely a fair tool if you don’t seek closeness and blade feel, and of course if you enjoy the aesthetics and weight of raw brass.

Specs:

• Material - CW510L Brass (Pb ≤ 0,2%)
• Making Process - CNC Machining
• Surface Finish - Satin/Blasted
• Razor Type - Double Edge Closed Comb
• Blade Gap - 0,65 mm
• Blade Exposure - 0,15 mm
• Total Weight - 99 g
• Handle Length - 87 mm
• Handle Thickness - 13 mm
• Blade Side Tabs - Covered
• Made in Italy

Feel free to ask any question or further information down in the comments and let me know if there are any specific razors that you would like to see on this series. Thanks to whoever took their time to stop by!

I’ve been wet shaving with a safety razor/shavette for over a year. Even though I made a few small mistakes at the beginning, I can now complete a flawless two-pass shave even with a Japanese blade. However, no matter how careful I am, I get severe razor burn with double-edge/shavette blades, whereas I feel no skin irritation at all when using a Gillette Fusion 5 Proglide. I’ve tried pre-shave lotions, oils, and various creams. I’ve also tried at least 20 different blades, but nothing has changed. I’m starting to think my skin just isn’t suited for shavette shaving. Has anyone else experienced this? Is razor burn inevitable when shaving with a shavette? How can I tell if my skin is actually sensitive?

Bought them off Naver and shipped to my accommodation, price difference is huge

Wellington is still firmly in winter’s grip, but before stepping out into yet another chilly morning I spent a brief time in the (virtual) Mediterranean. The Shield is a very good razor and the Feather Professional AC blade delivered despite being the sixth use.

**Sep. 2, 2026**
* **Prep:** Epsilon - Blue Mediterranean - Preshave
* **Brush:** Simpson ‘Petrol Head’ TT
* **Razor:** Shield Artist club
* **Blade:** Feather Professional (6)
* **Lather:** Epsilon - Blue Mediterranean - Croap
* **Post Shave:** Epsilon - Blue Mediterranean - Aftershave
* **Post Shave:** Epsilon - Blue Mediterranean - Lotion

Shared from [My Shave Den for iOS](https://apps.apple.com/app/1581646387)

September 1, 2026

Overall Rating: ★★★★★ (Epic Shave!)

Smoothness: ★★★★★ (BBS Perfection)

Irritation: ★☆☆☆☆ (Zero Burn)

Time of Day: Morning ☀️

Blade Uses: 4

Passes: 2

Razor Setting: 5

Razor: Merkur Futur Adjustable

Blade: Astra Superior Platinum (IN)

Soap: Through The Fire Fine Craft For Flint

Brush: Merkur Futur Silvertip

Aftershave: Through The Fire Fine Craft Roadmaster

Notes: Great shave. Lather was easy and plentiful, and the scent lasted a few hours.

Generated by Shaving Sherpa — https://www.shavingsherpa.com

For a long time I had been a quick, in the shower, Arko/Proraso straight on the face, no brush, 2 pass, 2 minute shave kinda person outside of special occasions. Recently I decided to get back into nicer soaps, making a nicer lather with a brush, etc. but I still want to get on with the day so keep it pretty quick and still do it in the shower.

I wet and drain the soap and start the brush soaking in a mug first thing, wash my body, load my brush with soap, use that to wash my face/neck/whole head, load more soap and face lather for the shave, 2 passes with that, use the mug to rinse the brush using big flings only acceptable in a shower. Total is maybe 5 minutes at most? But still feels pretty luxurious compared to my old routine.

Anyone else part of the hobby but also want to get on with your day? What do your setups consist of?

⌾ Razor: Blackland Ti OC
⌾ Blade: Wizamet Super Iridium (2)
⌾ Bowl: Captain’s Choice Obsidian
⌾ Brush: Oumo Climber ST-2
⌾ Soap: Martin de Candre Original
⌾ Balm: Nivea Sensitive
⌾ Splash: Floïd the Genuine

The second day of great shaves with the Blackbird Ti.

I love using the OC plate - max efficiency and smoothness for me. It’s an excellent daily shaver, not a trace of irritation

I got a hold of my grandpa’s old boar brush a while back, and knew I was going to restore it one day, being a DIY kinda guy.

I can’t find the picture I took before I cut out the warped-and-thoroughly-bent-to-the-side bristles, but I did document what it looked like after I removed them, before I gave the handle a little sanding with 600 grit in preparation for the tung oil. It got 9 coats altogether. I love tung oil—I love how it still looks and feels like wood. I think it looks like oak, but I'm not an expert.

Getting the old knot out really took some work! I had to perforate it with a bunch of ~1mm drill holes and then go to town with a screwdriver, hammer, and an ortho chisel while being VERY conservative to not mar the handle.

Finally it was ready for a new knot, so I ordered a 22mm boar knot from Maggard Razors. It didn’t fit perfectly, so I had to Dremel out the hole, adding around 1mm to get it to fit. I used 4 pennies to get the right loft, it was a pretty tall brush.

Now I have begun to break it in, and it is so perfect! Great for face or bowl lathering—I’m just so happy with how it came out. I really wish my grandpa was around to see it!

Ah I have missed this stuff! And the slant - new to me was great, it is light at 16g but it is very well balanced and the blade felt incredibly rigid and without chatter.

Found the correct angle quickly

1st pass - handle tightened all the way up felt mild/

2nd and 3rd passes backing off the handle in increments until i found quite a decent amount of blade feel actually, 100% the closest shave I've had in a month 😄

Wtg/xtg-x2

Went for a big helping of the CF lime,

Good to revisit the omega boar after a month of synthetic and 4711 was the icing on the cake👌

Have a good one lads!

01/09/2026

- HAGS Baby Blue Cooling Pre-Shave
- APShave Co 24mm Tuxedo
- HAGS Abyssal Lagoon
- Ascender Skyline R1
- Gillette Perma-Sharp (3)

I dabbled with shaving for a while. At first I bought Rockwell 6C for the changeable plates. Later learned about the AL13 and got that. I didn't use much neither but remember enjoying AL13 more. Overall I was interested in shaving my head not so much my beard.

Now I'm a mustache guy, so I started shaving regularly. I do like the ease of the Henson. I rarely cut myself, although I do every time if I even dare to go ATG. I'm also trying different blades, I'm on Astra Blue atm. Shaving with the grain I'm never really satisfied with the closeness of the shave, but what can I do, right?

A few days ago I saw a comparison on YouTube of the AL13 medium and the 6C. The guy concluded that the medium is the 2 plate. I was long curious to try a more aggressive razor as mine is mild. I remember having not so great of experience with my Rockwell but now I'm more experienced with DE shaving.

Today, out of curiosity or to commemorate my gf leaving me I gave 4 plate on my 6C a go. I did two passes WTG. The shave was mostly smooth. Even when I went slightly XTG it was far better than with AL13. I might've hesitated with the angle more than once, especially with under the bottom lip. Although it's still nowhere near a close shave, and I had some tiny nicks on my chin. What I noticed is that the skin is more sensitive afterwards and I feel that I have shaved my face. Some tenderness and heat are present. This doesn't happen with Al13 I go about my day with no extra sensations.

To the experienced shavers, was I too optimistic jumping to the 4 plate straight away?

Also, is it unreasonable to expect from a razor to give you 0 extra sensations after the shave?

SOTD: Sep 1, 2026
Razor: Alpha Futura
Blade: Tatara Double Edge, 3rd use
Brush: Trotter Barber Nocturnal Gold STF
Soap: BBS Providence
Aftershave: BBS Providence
Balm: Neutrogena Ultra Gentle Face Gel Hydrator
Additional Care: Humphrey's Witch Hazel Astringent

-From the Shave Carousel

Here in Aotearoa we might be struggling to shake off winter, but sometimes you just need the bracing chill of Proraso green ❄️

**Sep. 1, 2026**
* **Prep:** Proraso - Rinfrescante - Preshave
* **Brush:** Simpson Trafalgar T2
* **Razor:** Tatara Amakuni
* **Blade:** Feather Professional Softguard (2)
* **Lather:** Proraso - Mentholated - Croap
* **Post Shave:** Proraso - Rinfrescante - Aftershave
* **Post Shave:** Proraso - Rinfrescante - Lotion

Shared from [My Shave Den for iOS](https://apps.apple.com/app/1581646387)