This is for a 400 linear ft livestock fence for two goats NOT chain link. The fence is not attached to the house but the opening to a deck and would have a gate on both sides. The shape of the yard has three straight sides with about 90 degree angles and one side with a 120 degree angle and a sharp angle on the other end. There is no trees, bushes, or brush to clear out. We are in upstate SC. I feel like this is a little on the more expensive side from what I have seen and we are going to look at other companies, but we were trying to get an idea for a minimal and basic fence.

If the picture is not showing it would be $5400 and a $200 up charge for a slightly larger gate to fit a car through.

Use galvanized welded-wire fencing designed for livestock containment. Welded wire will be stretched and secured continuously along the fence line. - Standard materials, delivery, installation labor, fastening hardware, and normal job-site cleanup are included in the total price.

I built a simple picket fence using 8-foot 4” cedar decking, but the end cuts from the pickets have left me with about 400× 20-24” short boards (about 1/3 of them are in the stack shown). We burned the odd/triangular top cuts but it feels like I should be doing something more useful with all these boards. Suggestions?

Or maybe I should just burn them, they are excellent firewood. The local spruce/cedar mill where I got the lumber is only blocks from our house, and they take scrap to chip, so also a possibility.

We live in Middle Tennessee. Spring and Fall are generally windy and we get periodic storms that deliver brief periods of high to very high winds (20mph+)

I'm in the middle of replacing our 8' high, 10' wide (double) gate it and about to install pickets. The old gate just had normal 8' pickets, one after the other-- this matches the rest of the fence but the gate would sometimes take a beating from the

This time, I'm considering using shadow pickets on the gate to help with wind stress on the gate and it's hardware. This should help, right?

Wondering about how much picket overlap I should plan on? Obviously, more overlap more privacy but also less benefit with regard to wind.