How do I get rid of this red light? The battery shows 100% in G HUB, the mouse works perfectly both wireless and wired, but the LED on top is stuck solid red the entire time. Normally the solid red light means low battery, right? But in this case it’s fully charged according to the software

Tried a bunch of fixes and nothing seems to work, does it just sound that bad right out of the box

I have a G Pro X Superlight 2 and the left click stopped registering after about 2 months. I can hear the click, but it doesn't register unless I press really hard. If I click it many times it starts working again for a while, then goes back to failing. Is this normal , or did I just get a bad unit?

Hi, my Logitech Pro X 2 dongle broke, I contacted Logitech support and they said they dont have any other one, is there any other solution?

I have a new G502H and previously had a G402 so i am pretty used to use the snipper button and the other dpi change buttons, my problem is that sometimes the buttons dont work, it is not a profile problem and the buttons are correctly assigned, am i doing something wrong ?

My brand-new Logitech G915 X gaming keyboard (non-wireless, but USB-C) has arrived, but it apparently doesn't even have native Plug & Play support on my Windows 7 Gaming-PC (fully patched, USB 3.0 & -C drivers integrated/installed , Legacy CSM Boot on & Legacy USB Mode off on my ASUS Z390 motherboard), because the keys don't work when W7 boots up - even when accessing BIOS menu, the keys DO work!

My previous Logitech gaming keyboard (G510) worked flawlessly despite being connected to the same Z390 chipset - Thanks to Me having USB 3.0/C and various other missing drivers integrated into my custom W7 installation image PRIOR to having installed W7. It's keys worked even before I installed LGS/Logitech-specific drivers on W7 - which means, it does have Plug & Play/native support for basic use!

Since I assumed the G915 X supports Plug & Play/native detection without prior driver install (as keyboards usually ALWAYS do - of course, W7 supports it too!), I hoped that I could at least use it's keys without issue - I already knew beforehand that configuring/customizing the new keyboard (create profile, change RGB settings, etc.) would not be possible in W7, since newer versions of the "Logitech G Hub" software cannot be installed on W7.

But "Plug & Play" (basic use of the keyboard) should always work natively regardless of the operating system - in this case however, it apparently doesn't OR I did something wrong or am I missing something? 🤔

First of all lovely headset and ive had it roughly 4 years, however I keep having this issue where the dongle weight eventually causes this to come loose. This is the second dongle ive had do this for this headset now. Anyone else had a similar issue? If so any advice would be appreciated since I'm well out of warranty, my options are ask support for another connector again, or potentially just buy a different headset, which id rather not do

I want to get this shifter and handbrake for my Xbox setup. I will be buying the adapter for it to make it work on console but was wondering if anyone has any feedback on it before I buy it as it’s kinda expensive. Thank you

Where can i get a replacement dongle for the superlight 2 dex? Its get too hot after a few seconds then the mouse just disconnects. Is this fixable?

Hello just curious if anyone has had this same problem before and if there’s a fix. Currently have a A40 headset with m80 mix amp. Headset is working fine but mic is not picking up. Tried troubleshooting shooting on google and tried ever solution it offered and nothing worked. Bought a brand new A40 with m80 mix amp and same exact problem. Now if I use a direct cable from headset to controller the mic works. Anyone experienced this before ??

Collegando il volante al PC si accendono solo due luci arancioni, ma G Hub non rileva né volante né pedali. Inoltre quando lo collego all’alimentazione non si calibra più, è completamente morto tranne per le due lucine.

And the ffb does not feel right.

Thanks!

I have my G913 connected through the Logitech wire in Lightspeed mode. Used to be, that the keyboard would come alive as soon as the computer was turned on.

Recently this has stopped happening. I've had to take out and reinsert the cable before it comes to life. Today, even this did not work and I had to wait a few minutes for the app to wake the keyboard once it loaded, leaving me at the Windows log in screen.

My motherboard is one that will not boot unless it recognises a keyboard is plugged in, so the keyboard must be responding to hardware polling, bu it is unresponsive to keyboard inputs at log on.

Any ideas what's going on?

I'm looking for a gaming headset and was looking at the A50x. It would be my first gaming headset

What I need is immersion in single player story games.preferably the being there feeling

Good spatial awareness during FPS games

Some oomph in the low end without it being distorted.

I play Sim racing titles, fps games and single player story driven games.

Would the A50x be a good match? Also are there any issues that you find annoying?

Thanks?

I’ve come from using a Logitech G435 and I wanted to upgrade to a Logitech G Pro X2. The Pro X2 sounds great, but it has severe audio desync compared to the G435, on my iPhone 16 Pro Max. I understand that every Bluetooth Headset has desync, but compared to the G435 it is unbearable. It’s only an issue on my iPhone, on a laptop it’s normal.

I’ve tried talking to Logitech customer support, but similar to previous experiences, they weren’t very helpful. I don’t think they could work out which headset I was referring to and they just told me to return it, which is going to be hard because of the store I bought it from.

So far I’ve:
* Made sure the software is up to date in G HUB
* Reset the headset
* Unpaired and Re-paired the headset
* reset my phone’s network settings
* Removed all apps using Bluetooth
Nothing has had any effect.

Currently I have to turn the headset on and off every 5 minutes to get the audio to line back up.

Can anyone offer me any help at all?

Edit: it’s not all the time, the audio will stutter briefly, then it will be desynced.

This suddenly started happening and it's annoying. Everything is updated, and i've tried changing usb ports of the receiver and it still happens.

I even have a second Lift mouse, which i don't use because the click button is faulty. I tried it with it's own receiver in the same usb port and with the same battery and it behaves OK, so i'm starting to think that the second one that i bought is faulty as well

I’ve tried everything, the internet said that it’s probably a connection issue. But I made sure power is supplied too it and it still doesn’t work. help

Hey all, It's my first post, but I'm hoping you can help.
I have a mouse (G600).

It works fine on my desktop PC, but on my laptop it seems to know its connected but says inactive.

How can I fix this? My laptop is arm64 if that helps?